Tire balancing has been used to address driver ride complaints, reduce vehicle vibration, and minimize premature and irregular wear. Lately, data has shown that balanced tire/wheel assemblies can significantly affect fuel economy, especially in high-speed line haul applications.

Keep reading to know more about the benefits, maintenance, and procedure for tire balancing.

Tire Balance

Fleet managers are always on the outlook for the best solutions to give maintenance to their trucks. Keeping your tires balanced is one of the most important things when it comes to truck maintenance.

There are some methods to keep your truck balanced; however, balancing beads is the best way to do it because of its benefits.

Balancing Beads

There are some methods to keep your truck balanced; however, balancing beads is the best way to do it. Balancing beads is an innovative solution for balancing truck tires with more benefits compared to other methods. Some of the benefits are:

  • Longer Tire Life: When a tire is properly balanced, it also ensures a more even wear, which increases tire life.
  • Reduced Maintenance Costs: Balancing beads provide an alternative to costly balancing ring installations.
  • Reduce Vibration: Balancing beads can balance the complete wheel assembly in all wheel positions.
  • Better Fuel Economy: The longer the run is at highway speeds with balanced wheel assemblies, the greater the fuel savings.
  • Fast Results: Balancing beads procedure is faster than other methods.

ABC Balancing Beads, The Fastest Way To Balance Your Truck Tires

ABC Balancing Beads procedure is faster and more efficient than other procedures.

Their injection tool is a quick and easy tool to balance tires and complete wheel assembly on a vehicle in 5 simple steps and can take as little as 5 minutes per tire.

  • Step 1: Place a floor jack underneath the front axle when doing steer tires to take the pressure off them. 
  • Step 2: Release the air from the tire through the valve stem.
  • Step 3: Fill the injection pump by simply pouring the beads into the injection pump reservoir.
  • Step 4: The chuck is attached to the valve stem to make sure the air pressure is in the off position, and attach your airline.
  • Step 5: Holding the injection tool in a vertical position, up in the air valve release from three o’clock to six o’clock, slowly turning the injection tool upwards toward you.

Whether you have a commercial vehicle, truck fleet, bus, coach, or motorcycle, and you are looking for tire balancing beads, ABC Balancing Beads can offer you the best solution.